 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A * Designs meet or exceed IEEE 802.3 10Base-T specifications * Compatible with a variety of 10Base-T transceiver chipsets * Multiple topologies and pinout variations for optimal performance and layout consideration * 2000 Vrms isolation * Through-hole and surface mount packaging ELECTRICALS AT 25C Part No. Insertion Loss (dB) Max 1-10MHz Attenuation (dB) Min @30MHz TX RX Return Loss (dB) Min 500KHz-10MHz Crosstalk (dB) Min 1MHz-10MHz 30MHz CM-CM Rej (dB) Min Package 30MHz 50MHz 100MHz Schematic Style 0556-2006-14 0556-3873-03 0556-5999-19 A556-2006-00 A556-2006-02 A556-2006-03 A556-2006-DE S556-5999-00 S556-5999-02 S556-5999-32 S556-5999-DE -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -27 -27 -27 -27 -27 -27 -27 -27 -27 -27 -27 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -15 -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -40 -40 -35 -35 -35 -35 --35 -35 -45 -- -40 -35 -30 -30 -30 -30 --30 -30 -45 -- -30 -30 -30 -25 -25 -25 --25 -25 -35 -- A B C D E F G D E H G 1 6 2 3 3 3 3 4 4 5 4 SCHEMATICS A B Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A SCHEMATICS (CONT'D) C D E F G H Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel: 201-432-0463 * Fax: 201-432-9542 * E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A MECHANICALS 1 2 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel: 201-432-0463 * Fax: 201-432-9542 * E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A MECHANICALS (CONT'D) 3 4 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel: 201-432-0463 * Fax: 201-432-9542 * E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A MECHANICALS (CONT'D) 5 6 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel: 201-432-0463 * Fax: 201-432-9542 * E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960050A APPLICATION CIRCUIT APPLICATION NOTES * Bel's surface mount 10Base-T network component filter modules provide the complete solution as the interface module between the IC transceiver chip and the media side connector. Designed within each module are transmit and receive filter networks, high voltage isolation transformers and high performance EMI suppression common mode chokes. Each module fully meets the IEEE 802.3 standards to 10 Mbps data rates over 100 meters of media cable. * All of these part types have been designed to provide signal performance optimization, maximum noise reduction and minimum crosstalk interference. Careful board layout and grounding techniques are also critical to control jitter and signal reflections. * Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 |
Price & Availability of S556-5999-32
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |